Frozen pipe bursts during a hard freeze
We thaw the line safely, cut out the split section, and replace it with freeze-resistant PEX or insulated copper. We also insulate nearby pipes to prevent a repeat.
When a pipe bursts, every minute counts. Our team delivers burst pipe repair Littleton CO homeowners trust, with emergency response day or night. We shut off the water, find the break, and fix it using copper, PEX, or PVC that meets Colorado code. From frozen lines in Ken Caryl to slab leaks near Sterne Park, we stop the damage and get your water back on.

Burst pipe repair Littleton CO is the emergency plumbing service that stops water loss, restores pressure, and replaces the failed section of pipe before it damages your home. A burst pipe can release hundreds of gallons per hour, so the job starts with shutting off the main and isolating the break. We cut out the damaged copper, PEX, or PVC, then solder or crimp in a new section and pressure-test the line before we leave.
Littleton homes face a specific set of pipe problems. Winter nights drop below freezing, and older homes in Historic Downtown Littleton still have copper lines that split when water freezes inside them. Newer builds in Roxborough use PEX, which can fail at fittings after years of thermal cycling. Whether you need emergency burst pipe repair Littleton CO or a planned frozen pipe repair in Littleton, Colorado, we carry the parts and tools to finish the job in one visit.
Every burst pipe repair includes the essentials to stop the leak and restore your water. We handle diagnosis, repair, testing, and cleanup. If water damage repair or repiping is needed, we'll explain your options and price it clearly before we start.
We locate and shut off your main water valve, stopping the flow and limiting damage. If the valve is stuck or broken, we replace it as part of the repair.
Using a pipe camera inspection system and leak detection equipment, we find the exact break and check for secondary leaks or weak sections nearby.
We cut out the damaged pipe and install new copper, PEX, or PVC, using a soldering torch or PEX crimping tool. Fittings and joints are matched to your system.
We restore water and pressurize the line to 80-100 PSI, watching for pressure drops. The system is flushed to clear debris, and we check every fixture.
We clean the work area, remove old pipe and debris, and leave your home ready to use. You get a walkthrough of the repair and maintenance tips.
You call, we answer. We ask where the water is coming from, help you shut off the main if you haven't already, and dispatch the nearest licensed plumber. You get a name and an estimated arrival time within minutes.
We arrive, confirm the water is off, and inspect the damage. Using a pipe camera inspection system and leak detection equipment, we locate the exact break and check for secondary leaks. You get a written estimate before any work begins.
We cut out the damaged section with a tube cutter, then install new copper, PEX, or PVC pipe using a soldering torch or PEX crimping tool. Fittings are secured, joints are sealed, and the repair is matched to your existing system.
We restore water and pressurize the line to 80-100 PSI, watching for drops that signal a hidden leak. The system is flushed to clear debris, and we check every fixture for proper flow and temperature.
We clean the work area, haul away old pipe, and walk you through what we fixed. You get maintenance tips to prevent another freeze, plus a warranty on parts and labor.
Purpose-built equipment, used by trained technicians — so the job is done accurately the first time.
Used to grip and turn pipes and fittings during repair. Essential for removing old sections and tightening new connections.
For copper pipe repairs, we use a soldering torch to heat joints and apply solder, creating a watertight seal that meets code.
When repairing PEX tubing, we use a crimping tool to secure fittings. This creates a reliable, leak-free connection without soldering.
We run a camera through pipes to locate breaks, corrosion, and blockages. This helps us find the exact repair point without unnecessary digging.
Electronic leak detection helps us find hidden leaks behind walls and under slabs, so we can repair the right spot the first time.
We use a pressure gauge to test the line after repair, ensuring it holds 80-100 PSI without drops that indicate a hidden leak.
A homeowner in Ken Caryl woke up to water spraying from a split copper pipe in the crawl space. The freeze had burst a 6-foot section, flooding insulation and pooling water under the house.
We shut off the main, cut out the split copper, and replaced it with insulated PEX. The line was pressure-tested to 100 PSI and held steady. Water was back on in three hours, and we dried the crawl space.
A family in The Meadows noticed a warm spot on their floor and a spike in their water bill. A slab leak was sending water under the foundation, risking structural damage.
We used leak detection equipment to pinpoint the break, then rerouted the line through the attic. The repair took six hours, and the water bill returned to normal the next month.
A rental property in Roxborough had a burst PEX fitting in the upstairs bathroom, flooding the ceiling below. The tenant called us at 7 a.m. on a Saturday.
We arrived within 90 minutes, replaced the failed fitting with a new crimp connection, and pressure-tested the line. The ceiling was dried and repaired, and the tenant had water back by noon.
From frozen lines to slab leaks, we handle the pipe failures that cause the most damage in Littleton homes.
Ask a pro →We thaw the line safely, cut out the split section, and replace it with freeze-resistant PEX or insulated copper. We also insulate nearby pipes to prevent a repeat.
We replace the corroded section with new copper or PEX, then inspect the rest of the line for weak spots. If multiple sections are failing, we discuss repiping.
We use leak detection equipment to pinpoint the break, then repair or reroute the line. We restore water flow and help you document damage for insurance.
We install a pressure gauge and pressure-reducing valve to bring PSI into the safe range. We also check for other stress points and reinforce joints.
$350 - $1,200 depending on scope
Burst pipe repair in Littleton costs $350 to $1,200 in 2026, depending on pipe material, location, and whether water damage repair is needed. Copper repairs cost more than PEX because of material and labor. Emergency calls after hours may add a small fee, but we quote the full price before we start. We offer affordable burst pipe repair Littleton CO residents can budget for, with no hidden charges and a warranty on every job.
Our pricing reflects licensed labor, code-compliant materials, and a warranty on every repair. We don't cut corners, and we don't surprise you with hidden fees. You get a clear quote before we start.
Copper pipe costs more to repair than PEX or PVC due to material price and soldering labor. PEX repairs are faster and often less expensive.
Pipes behind walls, under slabs, or in crawl spaces take longer to reach. We may need to cut drywall or concrete, which adds labor and cleanup time.
A small split section costs less than a full line replacement. If multiple sections are damaged, we may recommend repiping to prevent future failures.
After-hours, weekend, and holiday calls may include a small emergency fee. Scheduled repairs during business hours avoid this charge.
“A pipe burst in our crawl space at 11 p.m. during a freeze. We called and a plumber was here in under an hour. He shut off the water, replaced the split copper section with PEX, and pressure-tested it. By 1 a.m. we had water back on. Clean work, fair price, no mess left behind.”
Mark R.Homeowner, Ken Caryl
✓ Verified“Our 1940s home had a burst pipe behind the kitchen wall. The team cut out the old galvanized line, ran new copper, and patched everything up. They explained why it happened and how to prevent it next winter. The repair has held through two freezes since.”
Susan L.Homeowner, Historic Downtown Littleton
✓ Verified“We manage several rentals and had a burst pipe flood a unit in Roxborough. The plumber arrived fast, fixed the break, and even helped us document the damage for insurance. He replaced the failed PEX fitting and checked every other line in the house. Solid, professional service.”
David P.Property Manager, Roxborough
✓ VerifiedShut off your main water valve immediately, then call us at +1 (831) 293-1204. If you can't find the main, we'll walk you through it over the phone. Turn off electricity to any flooded areas, move valuables away from water, and don't use a shop vac near outlets. We dispatch a plumber right away and typically arrive within 60 to 90 minutes.
Most burst pipe repairs in Littleton run $350 to $1,200 in 2026, depending on pipe material, access, and whether water damage repair is needed. Copper repairs cost more than PEX. Emergency calls after hours may add a small fee, but we quote the full price before we start. No hidden charges.
Insulate exposed pipes in crawl spaces, garages, and attics with pipe insulation. Disconnect garden hoses before the first freeze, and let faucets drip during hard freezes. Keep cabinet doors open under sinks on exterior walls. If you leave town, set the thermostat no lower than 55°F. These steps prevent most frozen burst pipe repair Littleton Colorado calls.
A typical burst pipe repair takes two to four hours from arrival to pressure test. Simple copper or PEX repairs can finish in 90 minutes. If the pipe is behind a wall, under a slab, or requires water damage cleanup, plan for four to eight hours. We give you a time estimate before we begin.
We're available 24/7 for emergency burst pipe repair in Littleton, CO. Licensed, insured, and stocked for same-day fixes. One call and we're on the way.
Call Now +1 (831) 293-1204 →Call us at +1 (831) 293-1204 or email [email protected] to schedule service or ask a question. We answer the phone 24/7 for emergencies and book same-day appointments during regular hours. If you are in Littleton or anywhere in Arapahoe County, we can get a plumber to your door fast.