Toilet runs constantly and wastes water
We replace the flapper valve or fill valve. We also check the flush handle and chain. Most running toilet repairs take under an hour. You will hear the water stop immediately.
When your toilet stops working, you need toilet repair Littleton CO homeowners can count on. We diagnose the problem, explain your options, and fix it right the first time. From running toilets that waste water to clogged lines that back up, our licensed plumbers handle every repair. We serve Arapahoe County with same-day appointments and upfront pricing.

Toilet repair Littleton CO is the diagnosis and correction of any failure in your toilet's fill, flush, or drain system. That includes replacing a worn flapper valve, resetting a loose wax ring, clearing a clogged trapway, or repairing a fill valve that won't shut off. We check the water supply line, the flush mechanism, and the seal at the floor. Most repairs take under two hours and use parts from Moen, Delta, Kohler, and American Standard that match your fixture.
Littleton homes deal with hard water that wears out flappers and fill valves faster than in softer-water areas. Older homes near Downtown Littleton and Historic Downtown Littleton often have original cast-iron drains that catch debris and clog. If you need a toilet fix in Littleton, Colorado, we handle everything from a simple flapper swap to a full toilet pull and reset. We also clear the drain line if the clog is deeper than the bowl.
Every toilet repair includes a full inspection, flat-rate quote, and test flush. We also clean up and warranty our work. Here is what you get when you book a visit.
We inspect the tank, bowl, supply line, shutoff valve, and floor seal. We check the flapper, fill valve, and flush handle. If the clog is deep, we use a drain snake or pipe camera inspection system. You get a clear explanation of the problem.
We quote a flat price before we start any repair. That price covers labor and standard parts. If we find a bigger issue, we stop and explain your options. You approve the new price before we continue. No surprises.
We use flappers, fill valves, wax rings, and supply lines from trusted brands. That includes Moen, Delta, Kohler, and American Standard. We match the part to your toilet model. We also use Teflon tape and pipe fittings that meet code.
After the repair, we flush the toilet three to five times. We check for leaks at the base, tank, and supply line. We verify the fill level and flush pressure. If anything is off, we adjust it before we leave.
We wipe down the toilet and floor. We haul away old parts if you want. You get a written warranty on parts and labor. That covers at least 90 days. If the same problem returns, we come back at no charge.
You call and describe the problem. Is it running, clogged, leaking, or not flushing? We ask a few questions to narrow it down. That helps us bring the right parts on the first trip. Most calls take five minutes.
A licensed plumber arrives in a marked truck. We inspect the tank, bowl, supply line, and floor seal. If the clog is deep, we run a drain snake or pipe camera inspection system. You get a clear explanation and a flat price before we start.
We fix the problem using quality parts. That may mean a new flapper valve, fill valve, wax ring, or supply line. If the toilet is cracked or too old, we tell you and quote a replacement. Most repairs take 45 to 90 minutes.
After the repair, we flush the toilet three to five times. We check for leaks at the base and supply line. We also test the fill level and flush pressure. If anything is off, we adjust it before we leave.
We wipe down the toilet and floor. We show you what we fixed and how to spot future problems. You get a written warranty on parts and labor. If you have questions later, you can call us directly.
Purpose-built equipment, used by trained technicians — so the job is done accurately the first time.
Used to loosen and tighten supply lines and shutoff valves. We also use it on tank bolts and fill valve nuts. It gives us the leverage to work without stripping threads.
First tool we try on a clogged toilet. A proper flange plunger creates a seal in the bowl. It clears most simple clogs without chemicals or a drain snake.
Used when a plunger fails. We feed the snake through the trapway to break up the clog. It reaches clogs that are past the toilet and into the branch line.
Used for tough clogs or repeated backups. High-pressure water scours the pipe walls. It removes grease, scale, and debris that a snake cannot reach.
We run a camera down the drain to see the clog. It shows us if the problem is in the toilet or deeper in the line. That helps us fix it right the first time.
Used to find hidden leaks at the base or supply line. It helps us confirm the leak source before we pull the toilet. That saves time and avoids unnecessary work.
A homeowner in Ken Caryl heard their toilet refill every 10 minutes. The water bill had jumped $45 in one month. The flapper valve was worn and not sealing. The fill valve was also corroded from hard water.
We replaced the flapper valve and fill valve in 50 minutes. The running stopped immediately. The next water bill dropped back to normal. The homeowner also received a 90-day warranty on parts and labor.
A family in Downtown Littleton had a toilet that clogged every other day. A plunger worked sometimes but not always. The clog was past the toilet in the branch line. The wax ring was also failing.
We used a drain snake to clear the branch line. Then we pulled the toilet and replaced the wax ring. We tested with five flushes. No more clogs. The repair took 90 minutes and cost $350.
A homeowner in Littleton Village noticed water at the base of their toilet. The floor was soft near the flange. The wax ring had failed and the flange was cracked. Water had been leaking for weeks.
We pulled the toilet and replaced the wax ring. We repaired the cracked flange with a flange repair kit. We reset the toilet and tested for leaks. The leak stopped. The repair took two hours and cost $425.
From running toilets to clogged drains, we fix the problems that disrupt your day. Here are the most common calls we get.
Ask a pro →We replace the flapper valve or fill valve. We also check the flush handle and chain. Most running toilet repairs take under an hour. You will hear the water stop immediately.
We use a plunger, drain snake, or hydro jetting machine to clear the clog. If the clog is past the toilet, we clear the branch line. We also check the wax ring and replace it if needed.
We pull the toilet, inspect the flange, and replace the wax ring. If the flange is cracked, we repair it with a flange repair kit. We reset the toilet and test for leaks. Most jobs take 90 minutes.
We check the fill valve, flapper, and rim jets. We clear mineral buildup from the rim holes. If the fill valve is bad, we replace it. We also adjust the water level for a strong flush.
$150 - $450 depending on scope
Most toilet repairs in Littleton run $150 to $450 in 2026. The price depends on the problem and the parts needed. A simple flapper swap is on the low end. A clogged drain that needs a drain snake or hydro jetting machine costs more. Pulling the toilet to replace a wax ring adds labor. We quote a flat price before we start. That price covers labor and standard parts. If we find a bigger issue, we stop and explain your options. You approve the new price before we continue.
Our pricing includes a flat-rate quote before we start. That means no hourly surprises. We also warranty parts and labor for at least 90 days. If the same problem returns, we come back at no charge. You get honest pricing and code-correct work.
A flapper or fill valve replacement is the least expensive. A clogged drain that needs a drain snake costs more. Pulling the toilet to replace a wax ring adds labor. The more complex the repair, the higher the cost.
Standard parts like flappers and wax rings are inexpensive. Specialty parts for Kohler, American Standard, or older toilets may cost more. We stock common parts on our trucks to avoid delays.
A toilet in a tight space is harder to work on. That can add time and cost. A toilet in an open bathroom is easier. We quote based on what we see on site.
Same-day and after-hours calls may cost more. We offer 24/7 emergency toilet repair Littleton CO service. Standard appointments during business hours are the most affordable.
“Our upstairs toilet started running constantly and our water bill jumped $40. I called on a Tuesday morning and they were there by 2 PM. The plumber replaced the flapper valve and fill valve in under an hour. He showed me the worn parts and tested everything. No more running. Fair price, no mess.”
Mark R.Homeowner, Downtown Littleton
✓ Verified“The toilet in our guest bath clogged and overflowed. We tried a plunger with no luck. They came out same day and used a drain snake to clear the line. Turns out the clog was past the toilet. They also checked the wax ring and replaced it. Everything works great now. Highly recommend.”
Susan K.Homeowner, Ken Caryl
✓ Verified“We had a leak at the base of our toilet that was soaking the floor. They pulled the toilet, replaced the wax ring, and checked the flange. The flange was cracked, so they repaired it too. No more leak. They were on time, clean, and explained everything. Will call them again.”
Dave M.Homeowner, Littleton Village
✓ VerifiedA constantly running toilet usually means a worn flapper valve or a faulty fill valve. In Littleton, hard water wears these parts out faster. The flapper may not seal, letting water trickle from the tank to the bowl. We replace the flapper or fill valve and stop the leak. Most repairs take under an hour and cost $150 to $300.
Most toilet repairs in Littleton run $150 to $450 in 2026. A simple flapper or fill valve swap is on the low end. A clogged drain that needs a drain snake or hydro jetting machine costs more. Pulling the toilet to replace a wax ring adds labor. We quote a flat price before we start.
Repair if the toilet is under 15 years old and the bowl and tank are not cracked. Replace if it is older than 20 years, uses more than 1.6 gallons per flush, or has a cracked porcelain body. We check the flange and supply line too. If repair costs more than half a new toilet, replacement makes more sense.
First, find where it leaks. Water at the base means a bad wax ring. Water from the tank means a worn flapper or loose supply line. Water on the floor near the shutoff valve means a bad gasket. We diagnose the leak, replace the failed part, and test for leaks before we leave. Most leak repairs take 45 to 90 minutes.
Call now for same-day service. We quote a flat price before we start. Licensed, insured, and warrantied. If your toilet is running, clogged, or leaking, we can fix it today.
Call Now +1 (831) 293-1204 →Call us at +1 (831) 293-1204 or email [email protected] to schedule service or ask a question. We answer the phone 24/7 for emergencies and book same-day appointments during regular hours. If you are in Littleton or anywhere in Arapahoe County, we can get a plumber to your door fast.