Whole home repiping with copper or PEX, permitted and inspected

Repiping Littleton CO Homes Done Right the First Time

Repiping Littleton CO homeowners can count on means replacing tired galvanized or failing copper lines with new copper or PEX tubing built for Colorado water. We handle whole home repiping for houses from Downtown Littleton to Ken Caryl, pull the permit, and pressure-test every line before the drywall goes back up. If your water tastes metallic or your pressure has dropped, call us.

↗
Fast online booking

Request service today

Tell us what is happening. Our local team will confirm your visit shortly.

No spam. No obligation. Just practical help.
Thanks — we'll call shortly to confirm your visit.
Repiping you can count on
Careful work. Honest options.
About this service

What Repiping Littleton CO Actually Involves

Repiping Littleton CO is the full replacement of your home's water supply lines, swapping old galvanized steel, polybutylene, or pinhole-leaking copper for new copper pipe or PEX tubing run through the same chases and walls. We cut out the old pipe, pull new lines to every fixture, solder or crimp the connections, then pressure-test the system at 100 PSI before closing anything up. It is not a patch job. It is a permanent fix for the pipe itself.

Most Littleton homes built before 1980 still have galvanized steel supply lines that have rusted from the inside out. You will notice it as low water pressure, brown water after a vacation, or a pinhole leak behind the drywall. Copper pipe replacement Littleton Colorado crews do every week starts with a pipe camera inspection system to map the runs, then a plan to replace them in two to four days without tearing your house apart. That is what whole home repiping Littleton looks like when it is done right.

  • ✓ Water Pressure Restored
  • ✓ No More Pinhole Leaks
  • ✓ Cleaner, Better-Tasting Water
  • ✓ Higher Home Value
What's included

What Our Repiping Service Includes

Every repipe we sell includes the same core scope. You get the permit, the inspection, the pressure test, and the warranty. Anything beyond that, like moving a fixture or adding a hose bib, we quote separately and in writing before we start.

✓

Full Supply Line Replacement

We replace every supply line from the main shutoff to each fixture, in copper pipe or PEX tubing. No partial repipes, no old pipe left in the wall to fail next year. If we cannot reach a run without major demolition, we tell you before we start.

✓

Permit & County Inspection

We pull the plumbing permit through Arapahoe County and meet the inspector on site. You get the signed inspection paperwork at the end. This is the document that proves the work was done to Uniform Plumbing Code and International Plumbing Code standards.

✓

Pressure Test & Flush

We cap the system and pressure-test at 100 PSI for at least an hour before drywall goes back. After the test, we flush every line and check flow at each fixture with a pressure gauge. You see the numbers before we call the job done.

✓

Drywall Patch & Cleanup

We patch the access holes we cut and leave the house broom-clean. We do not paint, but we leave you a smooth, sanded patch ready for primer. Most customers cannot tell where we were in after a week.

✓

Five-Year Workmanship Warranty

Our workmanship is warrantied for five years from the date of inspection. If a soldered joint or PEX crimp we installed fails, we come back and fix it at no charge. The warranty is written on your invoice and tied to your address.

How it works

How Our Repiping Process Works

01

Inspection & Quote

We run a pipe camera inspection system through the main and branch lines to see exactly what you have. You get a written scope, a fixed price, and a start date, usually within 24 hours. No surprises, no change orders halfway through the job.

02

Permit & Prep

We pull the plumbing permit with Arapahoe County and schedule the inspection before we cut anything. On day one we lay drop cloths, mask vents, and protect floors. Your water stays on until we are ready to cut over, usually mid-morning.

03

Rough-In New Lines

We cut out the old galvanized or copper and run new copper pipe or PEX tubing through the same chases. A PEX crimping tool and tube cutter keep the runs clean. Most homes take two to three days for rough-in, depending on how many fixtures and how tight the access is.

04

Pressure Test & Inspection

We cap every line and pressure-test the system at 100 PSI for at least an hour. The county inspector signs off before any drywall goes back. If a joint weeps, we fix it now, not after you paint. This is the step that separates a real repipe from a handyman patch.

05

Patch, Flush & Walkthrough

We patch the drywall access points, flush every line, and check flow at each fixture with a pressure gauge. Then we walk the house with you, show you the shutoff, and hand over the inspection paperwork. Most jobs wrap in four to five working days.

Tools & methods

Tools and Methods We Use for Repiping

Purpose-built equipment, used by trained technicians — so the job is done accurately the first time.

Pipe camera inspection system

Lets us see inside the existing supply and drain lines before we quote. We show you the footage so you can see the corrosion for yourself instead of taking our word for it.

PEX crimping tool

Creates the mechanical crimp connections on PEX tubing. Every crimp is gauged and checked. A bad crimp is the number one cause of PEX failures, so we do not rush this step.

Soldering torch

Used for copper pipe joints. We sweat every joint clean, ream the pipe ends, and pressure-test the whole system before closing walls. Copper done right lasts 50-plus years.

Tube cutter

Gives us a square, burr-free cut on every pipe end. A ragged cut is a leak waiting to happen. We deburr and ream every cut before it gets a fitting.

Pressure gauge

We test the new system at 100 PSI for at least an hour before drywall goes back. You see the gauge hold. If it drops, we find the leak and fix it before we leave.

Leak detection equipment

Used before and after the repipe to confirm there are no hidden leaks in slabs, walls, or crawlspaces. Acoustic and thermal tools find what eyes cannot.

Real results

Before and after.

1972 Ranch Repiped from Galvanized to Copper

Before

A 1,600-square-foot ranch in Ken Caryl with original galvanized steel. Pressure was 2.4 GPM at the shower. Three pinhole leaks in eighteen months. Brown water after every vacation.

After

Full copper repipe completed in four days. Pressure now reads 5.8 GPM at the shower. Water runs clear. County inspection passed first time. No leaks in the two years since.

Polybutylene Replacement in a 1990s Roxborough Home

Before

A 2,800-square-foot two-story with original polybutylene. The insurer sent a letter requiring replacement within 60 days or coverage would be dropped. Two prior leaks had damaged the ceiling below the master bath.

After

PEX repipe completed in five days with minimal wall cuts. Inspection passed. Insurer accepted the documentation and renewed the policy. Ceiling repaired and repainted.

Historic Downtown Littleton Full Repipe

Before

A 1920s home near the historic district with a mix of galvanized, copper, and patch repairs from three different decades. Pressure dropped whenever the washing machine ran. Two fixtures had been abandoned.

After

Full copper repipe with new shutoff valves at every fixture. Both abandoned fixtures restored. Pressure holds at 5.2 GPM with two fixtures running. Inspection signed off.

Problems we solve

Problems a Repipe Solves for Littleton Homes

Old pipe does not fail all at once. It gives you warnings for years, and most homeowners patch them until the warnings get too expensive to ignore. Here is what we see most in Littleton.

Ask a pro →
01

Low water pressure at every fixture

We replace the choked lines with new copper or PEX tubing sized to your fixture count. Flow returns to full at every tap. Most homes see pressure jump from around 2.5 GPM to 5 or 6 GPM at the shower after repiping.

↗
02

Pinhole leaks that keep coming back

We stop chasing leaks and replace the pipe. A pipe camera inspection system shows us how far the corrosion has spread. If the whole run is compromised, a full repipe is cheaper than three more emergency repairs.

↗
03

Brown or metallic-tasting water

New copper or PEX tubing has a clean interior that does not shed rust. After we flush the system, the water runs clear. Your water heater stops collecting sediment and your fixtures stop clogging.

↗
04

Frozen and burst pipes every winter

PEX tubing flexes when water freezes instead of splitting, and we insulate every run we install. If you have had one freeze event, we will inspect the rest of the system and tell you honestly whether a repipe makes sense.

↗
Transparent pricing

What Repiping Costs in Littleton

$4,500 - $12,000 depending on scope and material

Typical 2026 pricing for a whole-home repipe in Littleton runs $4,500 to $12,000, depending on square footage, fixture count, and material. Copper sits at the higher end, PEX at the lower end. We give you a fixed written price after the pipe camera inspection, so you know the number before we cut anything. No hourly billing, no surprise line items, no change orders halfway through. If a partial repipe will solve your problem, we will tell you that too and save you the money.

A repipe is a one-time cost that ends the cycle of emergency repairs, water damage, and lost pressure. Over 20 years, most homeowners spend less on one repipe than on repeated patches, drywall repair, and higher insurance claims.

01Home size and fixture count

A 1,200-square-foot home with one bath is a smaller job than a 3,000-square-foot home with three baths and a wet bar. More fixtures mean more runs, more fittings, and more time. This is the single biggest driver of cost.

03Access and wall construction

Homes with open basements and crawlspaces are easier to repipe than slab-on-grade homes with finished ceilings. Limited access means more drywall work and more time, which raises the total. We map access before quoting.

04Permit and inspection fees

Arapahoe County charges permit and inspection fees based on scope. We include these in your fixed price. You never get a separate bill from the county. The paperwork comes to you at the end of the job.

Proof you can check

Licensed, Insured, and Warrantied

✓
Colorado Master Plumber LicenseState of Colorado
✓
Colorado Journeyman Plumber LicenseState of Colorado
✓
Backflow Prevention CertificationState of Colorado
✓
EPA Lead-Safe CertificationU.S. Environmental Protection Agency
✓
OSHA Safety CertificationOccupational Safety and Health Administration
Customer reviews

What Littleton Homeowners Say

★★★★★
“Our 1972 ranch had galvanized pipe and the pressure was terrible. Two showers at once and you got nothing. The crew repiped the whole house in copper over four days, patched the drywall, and pressure-tested everything before they left. Pressure is night and day. They pulled the permit and the county inspector signed off. Worth every dollar.”
MR

Mark R.Homeowner, Ken Caryl

✓ Verified
★★★★★
“Called them after a pipe burst in the crawlspace during a cold snap. They repaired the burst, then walked me through why the rest of the copper was on its way out. We scheduled a full repipe two weeks later. Fixed price, no surprises, and they finished a day early. I have already recommended them to two neighbors.”
DK

Dave K.Homeowner, Roxborough

✓ Verified
Good questions

Repiping Questions Littleton Homeowners Ask

+1 (831) 293-1204

Most whole-home repipes in Littleton run $4,500 to $12,000 in 2026, depending on square footage, fixture count, and whether you choose copper or PEX. A 1,500-square-foot ranch with one bath sits near the low end. A 3,000-square-foot two-story with three baths and a finished basement sits near the top. We give you a fixed written price after the inspection, so you know the number before we start.

A typical Littleton repipe takes four to five working days from cut-over to walkthrough. Rough-in usually runs two to three days, the pressure test and county inspection take one day, and patching and flushing take another. Larger homes with multiple stories or slab access can run seven to ten days. You will have water back on each evening except the cut-over day.

If your home was built before 1980 and still has galvanized steel or polybutylene supply lines, yes, you are on borrowed time. Warning signs include brown water after a vacation, pressure that drops when two fixtures run at once, and pinhole leaks that keep coming back. A pipe camera inspection confirms it in about an hour. If the pipe is sound, we will tell you so and save you the money.

Both copper pipe and PEX tubing work well in Littleton. Copper lasts 50-plus years, handles our water chemistry, and adds resale value. PEX costs 20 to 30 percent less, installs faster with fewer wall cuts, and resists freezing better during Colorado cold snaps. We install both and will recommend based on your budget, your home's layout, and how long you plan to stay.

Ready when you are

Get Your Repiping Littleton CO Quote Today

We give same-day estimates, pull the permit, and stand behind the work with a five-year workmanship warranty. Licensed, insured, and bonded in Colorado. Call now and we will schedule your pipe camera inspection this week.

Get Free Estimate +1 (831) 293-1204 →
Request an appointment

Contact Us Today

Call us at +1 (831) 293-1204 or email [email protected] to schedule service or ask a question. We answer the phone 24/7 for emergencies and book same-day appointments during regular hours. If you are in Littleton or anywhere in Arapahoe County, we can get a plumber to your door fast.

Call anytime+1 (831) 293-1204Email the office[email protected]
Office hoursOpen 24 hours · 7 days a week
Request received — our team will be in touch shortly.
Tap to call+1 (831) 293-1204